View STF10LN80K5_8335067.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

december 2015 docid027751 rev 3 1 / 14 this is information on a product in full production. www.st.com STF10LN80K5 n - channel 800 v, 0.55 typ., 8 a mdmesh? k5 power mosfet in a to - 220fp package datasheet - production data figure 1 : internal schematic diagram features order code v ds r ds(on) max. i d STF10LN80K5 800 v 0.63 8 a ? industrys lowest r ds(on) x area ? industrys best figure of merit (fom) ? ultra - low gate charge ? 100% avalanche tested ? zener - protected applications ? switching applications description this very high voltage n - channel power mosfet is designed using mdmesh? k5 technology based on an innovative proprietary vertical structure. the result is a dramatic reduction in on - resistance and ultra - low gate charge for applications requiring superior power density and high e fficiency. table 1: device summary order code marking package packing STF10LN80K5 10ln80k5 to - 220fp tube am15572v1_no_tab d(2) g(1) s(3) t o-220f p
contents STF10LN80K5 2 / 14 docid027751 rev 3 contents 1 electrical ratings ................................ ................................ ............. 3 2 electrical characteristics ................................ ................................ 4 2.1 electrical characteristics (curves) ................................ ...................... 6 3 test circuits ................................ ................................ ..................... 9 4 package information ................................ ................................ ..... 10 4.1 to - 220fp package information ................................ ...................... 11 5 revision history ................................ ................................ ............ 13
STF10LN80K5 electrical ratings docid027751 rev 3 3 / 14 1 electrical ratings table 2: absolute maximum ratings symbol parameter value unit v gs gate - source voltage 30 v i d (1) drain current (continuous) at t c = 25 c 8 a i d (1) drain current (continuous) at t c = 100 c 5 a i d (2) drain current pulsed 32 a p tot total dissipation at t c = 25 c 25 w v iso insulation withstand voltage (rms) from all three leads to external heat sink (t=1s; t c =25c) 2500 v dv/dt (3) peak diode recovery voltage slope 4.5 v/ns dv/dt (4) mosfet dv/dt ruggedness 50 t j operating junction temperature - 55 to 150 c t stg storage temperature notes: (1) limited by maximum junction temperature. (2) pulse width limited by safe operating area (3) i sd 8 a, di/dt100 a/s; v ds peak v (br)dss (4) v ds 640 v table 3: thermal data symbol parameter value unit r thj - case thermal resistance junction - case 5 c/w r thj - amb thermal resistance junction - ambient 62.5 c/w table 4: avalanche characteristics symbol parameter value unit i ar avalanche current, repetitive or not repetitive (pulse width limited by t jmax ) 2.7 a e as single pulse avalanche energy (starting t j = 25 c, i d = i ar , v dd = 50 v) 240 mj
electrical characteristics STF10LN80K5 4 / 14 docid027751 rev 3 2 electrical characteristics t c = 25 c unless otherwise sp ecified table 5: on/off - state symbol parameter test conditions min. typ. max. unit v (br)dss drain - source breakdown voltage v gs = 0 v, i d = 1 ma 800 v i dss zero gate voltage drain current v gs = 0 v, v ds = 800 v 1 a v gs = 0 v, v ds = 800 v t c = 125 c 50 a i gss gate body leakage current v ds = 0 v, v gs = 20 v 10 a v gs(th) gate threshold voltage v ds = v gs , i d = 100 a 3 4 5 v r ds(on) static drain - source on - resistance v gs = 10 v, i d = 4 a 0.55 0.63 ? table 6: dynamic symbol parameter test conditions min. typ. max. unit c iss input capacitance v ds = 100 v, f = 1 mhz, v gs = 0 v - 427 - pf c oss output capacitance - 43 - pf c rss reverse transfer capacitance - 0.25 - pf c o(tr) (1) equivalent capacitance time related v ds = 0 to 640 v, v gs = 0 v - 72 - pf c o(er) (2) equivalent capacitance energy related 27 - pf r g intrinsic gate resistance f = 1 mhz , i d = 0 a - 7 - ? q g total gate charge v dd = 640 v, i d = 8 a v gs = 10 v see figure 16: "test circuit for gate charge behavior" - 15 - nc q gs gate - source charge - 4.2 - nc q gd gate - drain charge - 9 - nc notes: (1) time related is defined as a constant equivalent capacitance giving the same charging time as coss when v ds increases from 0 to 80% v dss (2) energy related is defined as a constant equivalent capacitance giving the same stored energy as coss when v ds increases from 0 to 80% v dss table 7: switching times symbol parameter test conditions min. typ. max. unit t d(on) turn - on delay time v dd = 400 v, i d = 4 a, r g = 4.7 ? v gs = 10 v see figure 15: "test circuit for resistive load switching times" and figu re 20: "switching time waveform" - 11.8 - ns t r rise time - 10 - ns t d(off) turn - off delay time - 28 - ns t f fall time - 13 - ns
STF10LN80K5 electrical characteristics docid027751 rev 3 5 / 14 table 8: source - drain diode symbol parameter test conditions min. typ. max. unit i sd source - drain current - 8 a i sdm (1) source - drain current (pulsed) - 32 a v sd (2) forward on voltage i sd = 8 a, v gs = 0 v - 1.5 v t rr reverse recovery time i sd = 8 a, di/dt = 100 a/s, v dd = 60 v, see figure 17: "test circuit for inductive load switching and diode recovery times" ) - 350 ns q rr reverse recovery charge - 3.9 c i rrm reverse recovery current - 22.5 a t rr reverse recovery time i sd = 8 a, di/dt = 100 a/s, v dd = 60 v, t j = 150 c see figure 17: "test circuit for inductive load switching and diode recovery times" - 505 ns q rr reverse recovery charge - 5 c i rrm reverse recovery current - 20 a notes: (1) pulse width limited by safe operating area (2) pulsed: pulse duration = 300 s, duty cycle 1.5% table 9: gate - source zener diode symbol parameter test conditions min typ. max unit v (br)gso gate - source breakdown voltage i gs = 1ma, i d = 0a 30 - - v the built - in back - to - back zener diodes are specifically designed to enhance the esd performance of the device. the zener voltage facilitates efficient and cost - effective device integrity protection,thus eliminating the need for additional external componentry.
electrical characteristics STF10LN80K5 6 / 14 docid027751 rev 3 2.2 electrical characteristics (curves) figure 2 : safe operating area figure 3 : thermal impedance figure 4 : output characteristics figure 5 : transfer characteristics figure 6 : gate charge vs gate - source voltage figure 7 : static drain - source on - re sistance =0.5 k t p (s) 10 -4 10 -3 10 -1 10 -2 =0.2 10 -2 10 -3 10 0 10 -1 single pulse 0.05 0.02 0.01 0.1 gc20940_zth
STF10LN80K5 electrical characteristics docid027751 rev 3 7 / 14 figure 8 : capacitance variations figure 9 : normalized gate threshold voltage vs temperature figure 10 : normalized on - resistance vs temperature figure 11 : normalized v (br)dss vs temperature figure 12 : output capacitance stored energy figure 13 : source - drain diode forward characteristics
electrical characteristics STF10LN80K5 8 / 14 docid027751 rev 3 figure 14 : maxi mum avalanche energy vs starting t j
STF10LN80K5 test circuits docid027751 rev 3 9 / 14 3 test circuits figure 15 : test circuit for resistive load switching times figure 16 : test circuit for gate charge behavior figure 17 : test circuit for inductive load switching and diode recovery times figure 18 : unclamped inductive load test circuit figure 19 : unclamped inductive waveform figure 20 : switching time waveform
package information STF10LN80K5 10 / 14 docid027751 rev 3 4 package information in order to meet environmenta l requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark.
STF10LN80K5 package information docid027751 rev 3 11 / 14 4.1 to - 220fp package information figure 21 : to - 220fp package outline
package information STF10LN80K5 12 / 14 docid027751 rev 3 table 10: to - 220fp package mechanical data dim. mm min. typ. max. a 4.4 4.6 b 2.5 2.7 d 2.5 2.75 e 0.45 0.7 f 0.75 1 f1 1.15 1.70 f2 1.15 1.70 g 4.95 5.2 g1 2.4 2.7 h 10 10.4 l2 16 l3 28.6 30.6 l4 9.8 10.6 l5 2.9 3.6 l6 15.9 16.4 l7 9 9.3 dia 3 3.2
STF10LN80K5 revision history docid027751 rev 3 13 / 14 5 revision history table 11: document revision history date revision changes 26 - may - 2015 1 first release. 21 - oct - 2015 2 modified: r ds(on) value in cover page. modified: table 2: "absolute maximum ratings", table 4: "avalanche characteristics", table 5: "on/off - state", table 6: "dynamic", table 7: "switching times", table 8: "source - drain diode". added: section 3.1: "electrical characteristics (curves)". minor text changes. 01 - dec - 2015 3 modified: table 2: "absolute maximum ratings" , and table 3: "thermal data" .
STF10LN80K5 14 / 1 4 docid027751 rev 3 important notice C please read carefully stmicroelectronics nv and its subsidiaries (st) reserve the right to make changes, corrections, enhancements, modifications , and improvements to st products and/or to this document at any time without notice. purchasers should obtain the latest relevant information on st products before placing orders. st products are sold pursuant to sts terms and conditions of sale in place at the time of or der acknowledgement. purchasers are solely responsible for the choice, selection, and use of st products and s t assumes no liability for application assistance or the design of purchasers products. no license, express or implied, to any intellectual property right is granted by st herein. resale of st products with provisions different from the information se t forth herein shall void any warranty granted by st for such product. st and the st logo are trademarks of st. all other product or service names are the property of their respective owners. information in this document supersedes and replaces information previously supplied in any prior versions of this document. ? 2015 stmicroelectronics C all rights reserved

▲Up To Search▲

Price & Availability of STF10LN80K5

	To Download STF10LN80K5 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .